Minolta EP2010 Operator's Manual download pdf (Page 68)

1139O1420A

2. When the Add Toner Indicator Lights Up

Replacing the Toner Bottle

A3

A4

A4

B4

FLS.

Inch

Auto

Photo

Darker

A

0.5~2.0

Auto

A4

Full Size

A3

Full Size Paper

B4 A3

B4 A4

A3 A4

A5

1151O072DA

Auto

uto / Photo

1151O072DA

The Add Toner Indicator lights up when toner

in the Toner Bottle is running out.

You can still make copies, but the image

density will become lighter and lighter. It is

recommended, therefore, that you replace the

Toner Bottle with a new one as soon as

possible.

Open the Front Door.

1

Swing open the Toner Bottle Holder

and pull out the Toner Bottle.

2

Shake a new Toner Bottle well.

3

With the Seal on the Toner Bottle

facing up, slowly peel off the Seal as

illustrated.

4

1139O1390A

1139O1410A

Be careful, some toner may puff out from

the bottle.

NOTE

Ensuring that the arrow ( ) on the

Toner Bottle is facing toward you,

insert the Bottle into position.

5

Insert the Bottle all the way into the

copier until the marking on the

Bottle is aligned with the marking

on the Toner Bottle Holder.

NOTE

Swing the Toner Bottle Holder closed

and close the Front Door.

6

•

Use ONLY the specified toner for this

copier. Using any other toner could

result in image trouble.

NOTE

Use the Auxiliary Toner Replenisher

Mode if the image is light immediately

after the Toner Bottle has been replaced

with a new one.

➭

p. 51

Auxiliary Toner Replenisher Mode

1139O1380A

1139O1420A

Chapter 5

When an Indicator Lights Up

63

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 105 106

Comments to this Manuals

No comments