Minolta DIMAGE VIEWER 2.1 Instruction Manual download pdf (Page 47)

Five camera sensitivity settings can be selected with a still

image. The auto setting automatically adjusts the camera

sensitivity to the light conditions between ISO 50 and ISO

200. The camera sensitivity can also be specified among ISO

50, 100, 200, and 400. The numerical values are based on

an ISO equivalent. As the ISO value doubles, the camera

sensitivity doubles. Noise increases with the sensitivity in

digital imaging; the ISO setting of 50 has the least noise and

400 has the most.

AUTO

100

200

ISO speed

400

0.8m ~ 1.7m (2.6ft ~ 5.6ft)

0.8m ~ 0.86m (2.6ft ~ 2.8ft)

0.8m ~ 1.2m (2.6ft ~ 3.9ft)

0.8m ~ 1.7m (2.6ft ~ 5.6ft)

Flash range (wide angle)

0.5m ~ 3.0m (1.6ft ~ 9.8ft)

0.5m ~ 1.5m (1.6ft ~ 4.9ft)

0.5m ~ 2.1m (1.6ft ~ 6.9ft)

0.5m ~ 3.0m (1.6ft ~ 9.8ft)

0.8m ~ 2.4m (2.6ft ~ 7.9ft)0.5m ~ 4.3m (1.6ft ~ 14.1ft)

Flash range (telephoto)

CAMERA SENSITIVITY (ISO)

The sensitivity of the camera can be changed in the manual recording mode with the

menu. To change recording modes, see page 34.

On the manual recording menu, select the camera sensitivity

setting. See page 36 for menu operation. If a manual ISO

setting is selected, an indicator is displayed on the monitor.

Manual ISO indicator

The flash range changes with camera sensitivity. Because of the optical system, the flash

range is not the same at the lens’ wide-angle position as it is at the telephoto position.

CAMERA SENSITIVITY AND FLASH RANGE

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 103 104

No comments

Minolta DIMAGE VIEWER 2.1 Instruction Manual Page 47