Minolta VECTIS 2000 Instruction Manual download pdf (Page 12)

2120

Full-battery symbol

Blinking low-battery symbol

alone and the shutter locks

INSTALLING THE BATTERIES

Your camera uses two CR2 batteries to supply power for all

camera operations. Please read all warnings in the Safety

Cautions section of this manual as well as those supplied by

the battery manufacturer.

1. Using the eyepiece cap,

turn the battery-chamber

cover counter-clockwise

and open the battery-

chamber cover.

•Turn the camera off before

removing the old batteries.

•Remove dirt and moisture from

the camera and batteries

before opening the battery-

chamber cover.

2. Insert the batteries as

indicated by the + and -

marks.

3. Close the cover then,

using the eyepiece cap,

turn the battery-chamber

cover to CLOSE to lock it.

•Main power is automatically switched on when a battery is

installed.

•If and blink in the data panel when the

camera is turned on, reset the date and time. See page 67.

Your camera is equipped with an automatic battery-power

indicator. Each time the main switch is turned on, the battery

symbol will appear in the data panel to indicate the power

status of the batteries. It is recommended that you always

carry spare batteries in your camera bag.

Checking the Battery Power

Power is sufficient for all

camera operations.

Power is extremely low, but

all functions are operational.

Battery will have to be

replaced very soon. Flash

recycling time may be slow.

Power is insufficient for

camera operation.

If no display appears, replace the battery or check that it is

inserted correctly.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 56 57

Comments to this Manuals

No comments

Minolta VECTIS 2000 Instruction Manual Page 12

Comments to this Manuals

Related products and manuals for Film cameras Minolta VECTIS 2000