Minolta magicolor 330 Service Manual download pdf (Page 522)

100

101

13-2 magicolor 330 - Base Engine Service Manual

Printer Specifications

General Specifications

Category Specification

Standard configuration Print Engine with Upper Tray (250 sheet), MSI (150 sheet),

and Face Up Tray

Printing method Xerography with two transfer processes

Exposure method Data modulated (off/on) laser beam scanning

Laser specifications Class 3B, 5milliwatt semiconductor laser diode

Resolution of printed image 600 dpi (dots per inch)

Development method Dry toner and carrier mixture

Fusing method Heat and pressure, with silicone oil lubricant

Black and White Printing Mode 16ppm. Monochrome using a single image that is made up of black

toner

Four Color Mode 4ppm. Four color process using separate yellow, magenta, cyan, and

black toner images

Warm-up time From either a cold start or from deep sleep mode (with an ambient

temperature of 22°C and relative humidity of 55%) to Ready to Print

within five minutes

Power supply requirements 110V printer

100 VAC (±10%) @ 50/60 Hz (±3 Hz)

120V printer

120 VAC (±10%) @ 50/60 Hz (±3 Hz)

240V printer

220/240 VAC (±10%) @ 50/60 Hz (±3 Hz)

Power supplied to the Controller PWB 5VDC @ 6.0A

Power consumption and input current of

the IOT during a print cycle. These fig-

ures do not take into account the power

consumption of the Controller PWB.

During Print Cycle:

100VAC: 1100 watts or less

120VAC: 1100 watts or less

240VAC: 1100 watts or less

At Ready:

100VAC: 1000 watts or less with Fuser on.