magicolor 2300W Installation Guide ®1800726-001A
Setting up Your Printer611Pressing on the transfer belt unit with one hand, take the tag attached to the transfer belt unit fixture with your other h
Setting up Your Printer 7Loading Tray 1 (Multipurpose Tray)Tray 1 (the multipurpose tray) is used for all supported media types, including envelopes,
Installing Accessories8Installing AccessoriesAttentionInstalling accessories always requires that the printer be turned off and unplugged.If you purc
Connect the Interface Cable 9Connect the Interface Cable$$$$USB Port Use a USB 1.1 cable (Type B) when connecting the USB port on the printer to the U
What’s Next?10What’s Next?You have now completed the hardware and software setup of your printer. There are four more important steps:1From the Windo
Safety Information 11Safety InformationTonerDo not throw the toner cartridge or toner into an open flame. The hot toner may scatter and cause burns or
Safety Information12 The internal components of the print head unit are NOT A FIELD SERVICEABLE ITEM. Therefore, the print head unit should not be op
Warranty Considerations 13Warranty ConsiderationsVarious factors can affect a printer’s warranty, such as electrostatic dam-age, unsupported consumabl
Warranty Considerations14
Thank YouThank you for purchasing a KONICA MINOLTA printer.TrademarksThe KONICA MINOLTA and KONICA MINOLTA logo are trademarks or registered trademark
Registering the PrinterMail (Americas only) —Fill out and send in the registration card enclosed in your shipment.Internet—Go to http://printer.konica
Getting Acquainted with Your Printer 1Getting Acquainted with Your PrinterDocumentation Set!"Acrobat Reader is provided on the Utilities and Docu
Getting Acquainted with Your Printer2Space Requirements Printer PartsThe following illustrates the parts of your printer that are referred to through
Getting Acquainted with Your Printer 3Front Inside View14Transfer belt release lever15Transfer belt 16OPC drum cartridge17Waste toner bottle18To ner c
Setting up Your Printer4Setting up Your Printer WARNING!Your printer weighs approximately 28 kg (62 lbs) with consumables. Be sure to have help when
Setting up Your Printer 54Pull the right-side door release $, and then open the right-side door %.5Open the two green levers % at the top of the fuser
Comments to this Manuals