Minolta DYNAX 3L Instruction Manual download pdf (Page 56)

111100

111111

Setup menu

LLCCDD bbaacckklliigghhtt 55 sseecc..

33 mmiinn..

––

RReesseett ddeeffaauulltt ––

OOffff

““NNoo””

PPoowweerr ssaavvee

MMeennuuSSeecc..MMeemmoorryy

DDeelleettee ccoonnff..

CClleeaann CCCCD

MENU SECTION MEMORY

The camera can remember which menu section was lasted

opened. If the menu section memory function is on, when the

menu button is pressed, the last menu section that was last

displayed is opened. When menu section memory is off, section 1

of the recording or playback menu is displayed when the menu

button is pressed.

Each time a delete command is used a confirmation screen

appears confirming the action to erase the image data. When this

screen opens, the no button is highlighted. This function allows the

yes button to be initially highlighted to make deleting images

easier. Care should be taken when deleting images as the data

cannot be retrieved once erased.

DELETE CONFIRMATION

DDeelleettee??

YYeess

NNoo

CLEAN CCD

Dust can enter the camera body when changing lenses. The camera should have a lens or body

cap mounted at all times. Confirm the rear of the lens and cap is free from dust before mounting on

the body.

Clean the CCD in a dust-free environment. Use a blower brush to remove the dust - compressed air

can damage the camera.

Only clean the CCD when necessary. Improper cleaning may damage the CCD.

The DiMAGE Master software can remove the affects of dust from RAW images. This is done

by taking a dust reference image before cleaning the CCD. For more on this process, see the

DiMAGE Master manual.

Accessory Notes

LLCCDD bbaacckklliigghhtt

EEnntteerr

RReesseett ddeeffaauulltt

PPoowweerr ssaavvee

MMeennuuSSeecc..MMeemmoorryy

DDeelleettee ccoonnff..

CClleeaann CCCCDD

LLCCDD bbaacckklliigghhtt

RReesseett ddeeffaauulltt

AAfftteerr cclleeaanniinngg CCCCDD,,

ttuurrnn ccaammeerraa ooffff.. CCoonnttiinnuuee??

YYeess

NNoo

The battery should be fully charged before cleaning the CCD. If

battery power is low, this function cannot be used. The use of the

optional AC adapter is recommended over the use of the battery.

Cleaning the CCD without sufficient power will cause permanent

damage.

Highlight “Enter” and press the center of the controller to begin the

cleaning routine.

Before the CCD is exposed, a confirmation screen appears;

choosing “Yes” executes opens the shutter and mirror, “No”

cancels the cleaning operation.

Remove the lens or body cap.

Use a blower brush to clean the CCD. Hold the body so it is

leaning forward to prevent the dust blown from the CCD resettling

in the camera. Do not touch the interior of the camera. If the

camera starts beeping, power is low. Immediately stop cleaning

and turn the camera off.

Turn the camera off to complete the operation. Replace the lens or

body cap.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 73 74

Comments to this Manuals

No comments

Minolta DYNAX 3L Instruction Manual Page 56

Comments to this Manuals

Related products and manuals for Measuring, testing & control Minolta DYNAX 3L