4Hardware Set-Up10. Close the metal cover and tighten four screws.Attach the right side cover.Tighten two screws.11. Close the upper cover.12. Connect
5Hardware Set-Up13. Make sure that “READY” is shown on the message display and the On Line indicator is lit.14. Press the On Line key once to take the
6Hardware Set-Up17. Press the Enter key to start printing the Config Print sheet. The printer returns on-line automatically.18. Make sure that under I
7Formatting the Hard Disk DriveFormatting via Windows OSNOTESBefore formatting the Hard Disk Drive, create a formatting file with the following steps.
8Formatting the Hard Disk Drive4. Make sure that “READY” is shown on the message display and the On Line indicator is lit.5. Press the On Line key onc
9Formatting Hard Disk7. Press the Item key 5 times to select the PS Font List item.8. Press the Enter key to start printing. The printer returns on-li
10Formatting the Hard Disk DriveFormatting via Macintosh OSFormat the Hard Disk Drive using the utilities included in any Font package available on th
11Downloading FontsWindowsUse the utilities included in any Font package available on the market. For details, see the user’s guide for the utilities.
Memodownload.fm 12 ページ 2003年11月18日 火曜日 午前11時13分
Trademark AcknowledgmentsPageWorks is a trademark of Minolta in the U.S.A. and Canada.Minolta is a registered trademark of Minolta Co., Ltd.Macintosh
iForewordWelcomeThis Hard Disk Drive Set-up Guide describes how to install and format the Hard Disk Drive. Before reading this Hard Disk Drive Set-up
iiForewordHard Disk Drive WarrantyWarranty TermThe Hard Disk Drive has a (1) One Year Warranty. The Hard Disk Drive must be returned to Minolta for re
iiiContentsCONTENTSHardWare Set-UpSetting Up ... 1Formatting the Hard Disk DriveFormatting
Memofwd.fm iv ページ 2003年11月18日 火曜日 午前11時12分
1Hardware Set-UpSetting UpCAUTION1. Turn the printer off and then discon-nect the power cord and interface cable from the printer.• Before opening and
2Hardware Set-Up2. Pressing the upper cover lock release button, open the upper unit.3. Loosen two screws to remove the right side cover.(Use a plus s
3Hardware Set-Up6. Open the metal cover.7. Attach the Hard Disk Drive and tighten four screws.(Use a plus screwdriver.)8. Connect the Hard Disk Drive
Comments to this Manuals