Minolta Flash meter IV Specifications download pdf (Page 10)

MINOLTA

METERS

310

Spot Meter F (8053-107)

The Spot Meter F lets you take

1° spot measurements of ambi-

ent or flash light. Liquid-crystal

displays on the meter’s side

panel and in the viewfinder

show a full range of exposure

information in both digital and

analog form. Exposure calcula-

tions for highlights, shadows,

or mid-tone areas can be made

at the touch of a button. Plus,

the lighting contrast can be

quickly checked while looking

through the viewfinder.

The Spot Meter F can automat-

ically calculate the exposure for

highlight or shadow areas.

And, by using the memory

function, the user can average

two readings for a mid-tone

exposure.

Exposure readings are shown

digitally in the meter’s data

panel and viewfinder displays.

The data panel also has an ana-

log f/number scale that can

indicate up to four exposure

readings. This full range of

information makes it easy to

determine the optimum expo-

sure in nearly any situation.

When the Spot Meter F is

switched off, the ISO and shut-

ter speed settings are stored in

memory. When the meter is

switched back on, the most

recent digital exposure readout

and any memorized data is dis-

played.

Item # MISMF..............

399.95

Neck Strap (8044-1051)

Replacement.

Item # MISNAM3.............

5.95

Lens Cap (8043-700)

Replacement.

Item # MILCSMF.............

4.95

Synchro Cord III (8034-910)

Item # MISC3.................29.95

Case (8053-600)

Replacement.

Item # MICSMF .............

36.95

Color Meter IIIF (805-5103)

The Minolta Color Meter IIIF is a color compensation meter for ambient and flash with correction value

memory. This makes it easier for photographers to maintain consistent color under various types of illu-

mination. The meter measures the color of the light illuminating the subject and determines the filtra-

tion required to correct that illumination for the film in use. When measuring both ambient light and

flash, selecting the Color Meter IIIF’s analyzing function will subtract the ambient light and display only

the measured results for flash light. Measurements can be taken for any of the three major film types:

Daylight (balanced to 5500k), Type-A Tungsten (balanced to 3400k), or Type-B Tungsten (balanced to

3200k). Measurement results can be displayed as light-balancing and color-compensating indexes, Kodak

Wratten filter number and CC index, or photographic color temperature (determined color temperature

based on film sensitivity). Display of Kodak Wratten filter numbers makes selecting filters quick and con-

venient; if 2 Wratten filters are necessary, the Color Meter IIIF displays both numbers.

Color Meter IIIF users can

store their own personal cor-

rection values for the recom-

mended filtration. Correction

values for LB and CC indexes

can be stored in any of the

meter’s nine memory channels

to custom-tune meter readings

for the desired color reproduc-

tion. The correction values are

added to the initial measured

values to calculate the final dis-

played results.

Item # MICM3F...........

899.95

LIGHTMETERS

PHOTO CELL Silicone Photo Cell

MEASURING SYSTEM Spot Ambient and Flashmeter

DISPLAY READOUT Digital L.C.D. in Viewfinder plus

L.C.D. Side Panel and L.C.D. Analog

FILM SPEED I.S.O. 12 to 6,400

F-STOP F0.7 to F90

SHUTTER SPEED 1/8000 sec. to 30 min.

FLASH SYNC TIMES 1 to 1/1000 sec.

ANGLE OF COVERAGE 1° with 12 x 17° View Field

SENSITIVITY AT 100 I.S.O. EV1 to EV22.5

OTHER DATA Optical System: Through-the-lens reflex type

utilizing semi-silvered mirror and pentaprism;

focus-fixed for readings 4

⁄

4 ft. to infinity;

Magnification 1.4x; Diopter adjustment -2.5 to 1.2

POWER SOURCE One AA Battery

DIMENSIONS 1.9 x 5.9 x 3.5” (48 x 150 x 89mm)

WEIGHT 8.5 oz. (240g)

Subject to change without notice

SPECIFICATIONS FOR SPOTMETER F

PHOTO CELL Triple Silicon Photo Cells (filtered for R.G.B.)

MEASURING SYSTEM Color Meter for Ambient and Flash

DISPLAY READOUT Digital L.C.D.

SENSITIVITY AT I.S.O. 100 AMBIENT EV3 to EV16.3

F-STOP AT I.S.O. 100 FLASH F2.8 to F180

COLOR TEMPERATURE 1,600 to 40,000k

LB FILTER VALUE -500 to +500 Mired

C INDEX 200m to 200g

LB FILTER NO. 85B + 81EF to 80A +80D

FLASH SYNC TIMES 1/500 to 1 sec.

POWER SOURCE Two AA Battery

DIMENSIONS 6.3 x 2.7 x 1.1” (160 x 68 x 28mm)

WEIGHT 7 oz. (200g)

Subject to change without notice

SPECIFICATIONS FOR COLORMETER IIIF

Minolta Spot

Meter F

(8053-107)

Minolta

Color

Meter IIIF

(805-5103)

Spot Meter F Accessories

We Ship Worldwide

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 20 21

Comments to this Manuals

No comments

Minolta Flash meter IV Specifications Page 10

Comments to this Manuals

Related products and manuals for Bridge cameras Minolta Flash meter IV