Minolta Dimage A1 User Manual download pdf (Page 143)

143

ANTI-SHAKE

When the Anti-shake system activates can be changed in section 4

of the setup menu. Two options are available:

Display + Exp.- when the shutter-release button is pressed part-

way down, the anti-shake function will activate if on. The affect of

the Anti-shake system can be seen in the live image.

Anti-shake Display + Exp

Full-time AF On

Grip sensor On

Ctrl dial set

Manual exp.

Delete conf. “No”

SS F/no.

F/no.

Exposure - Anti-shake is only applied during the exposure and is not apparent in the live image.

When the shutter-release button is pressed partway down, wait a moment before taking the picture

for the Anti-shake system to stabilize the image.

FULL-TIME AF

Full-time AF continually focuses the camera so the monitor image is always sharp. When the grip

sensor is on, full-time AF is activated when the camera is held; the eye sensor is also employed

when using the EVF. With the grip sensor off, full-time AF is always active when using the LCD moni-

tor and activated by the eye sensors when using the EVF. This function can be turned off to conserve

power.

Grip sensor

The grip sensor conserves power by only activating the full-time AF

function when the camera is held. The grip sensor also works with

the eye sensors when the EVF auto on option is used, see page

135.

The grip sensor can be turned off when the camera is mounted on

a tripod so that full-time AF and the EVF auto on function can be

used. Wearing gloves may prevent the grip sensor from working.

The sensor is controlled in section 4 of the setup menu.

Grip sensor

1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 171 172

No comments

Minolta Dimage A1 User Manual Page 143