Minolta DIMAGE VIEWER 2.1 Instruction Manual download pdf (Page 92)

92 DATA-TRANSFER MODE

PICTBRIDGE

Use the left/right keys of the controller to display

the image to be printed.

Repeat the previous steps until all the images to

be printed are selected. Press the menu button

to continue.

Press the up key to select the number of copies

to be printed. No more than 50 images can be

selected. To deselect an image for printing,

press the down key until the number of copies

reaches zero.

Total number of prints

Number of copies

Confirm the transfer-mode option in the setup

menu is set to PictBridge. Connect the camera

to a PictBridge compatible printer using the

camera’s USB cable. The larger plug of the

cable is connected to the printer. Insert the

smaller plug of the cable into the camera; the

camera turns on automatically and starts the

PictBridge connection.

Individual still images can be selected for printing on the PictBridge screen. When two

memory cards are in the camera, only the images on the card specified with the memory

priority option on the setup menu (p. 75) can be viewed.

Image size

:move :sel. :print

Total: 3 2

1600

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 103 104

No comments

Minolta DIMAGE VIEWER 2.1 Instruction Manual Page 92