Minolta CF911PE User Manual download pdf (Page 24)

2-6

Getting to Know Your Printer Chapter 2

CF911PE Operator’s Manual

3. Turning ON and OFF

Turning ON and OFF

• Turning the printer ON

Press the Power Switch to the (ON) position.

• Turning the printer OFF

Press the Power Switch to the (OFF) position.

When the unit is turned ON

The printer icon on the print station manager screen changes as follows when the power is turned ON.

(1) While the printer self-test operation and warm-up, off-line, printer busy, printer in sleep are per-

formed automatically, the indicator will turn yellow.

(2) If a printer system error occurs, the indicator will turn red.

(3) When the printer enters the print-ready mode, the indicator will turn green.

However, the printing operation cannot be performed even if data from the computer is sent at this time.

A warm-up time of approximately nine minutes (at a room temperature of 20ºC (68ºF)) is required before

printing can be performed.

NOTE

If the fusing temperature drops excessively during a multi-print cycle, there is a possibility that the

printing speed will be reduced. The printing speed will automatically return to normal when the fusing

temperature rises enough to ensure good fusing performance.

C4119O010AA

*Click the this icon, displayed Error Messages on the screen

of printer driver summary.

*Red + stripe is power off of the CF911PE.

*Dark green is power off of the PrintLink, or the unconnct the

interface cable.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 56 57

No comments

Minolta CF911PE User Manual Page 24