Minolta CF2002 Installation Manual download pdf (Page 92)

5.5 Administrator Mode Operations

CF2002/CF3102 5-51

Utility Mode Operations Chapter 5

Check that the left

margin of the test

pattern is between

2.5 mm and 3.5 mm. If

the left margin is within

the specified range,

skip to step 14.

If the left margin is less than 2.5 mm, touch to specify the desired positive

adjustment (between +0.1 mm and +3.0 mm).

If the left margin is more than 3.5 mm, touch to specify the desired

negative adjustment (between -0.1 mm and -3.0 mm).

Press the [Start] key. The adjusted test pattern is printed on 11 × 17-size paper.

Check the print result to make sure that the left margin is adjusted to between

2.5 mm and 3.5 mm.

❍

If more adjustment is necessary, return to step 8 and repeat the adjustment

procedure.

Touch [Enter].

Touch [Fin. Time] again in the next three screens that appear.

b: 3.0 mm ± 0.5 mm

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 211 212

No comments

Minolta CF2002 Installation Manual Page 92