Minolta MM-A208 Manual download pdf (Page 12)

Using the glassless attachment

The glassless attachment allows scans without any

extra glass surfaces in the optical path. See page

11 for instructions on how to insert the attachment

into the Universal Holder.

LOADING THE FILM HOLDERS

Using the standard attachment

The standard attachment is equipped with glass to hold the film flat. A set of five masks are pro-

vided for standard formats: 6X4.5, 6X6, 6X7, 6X8, and 6X9. See page 11 for instructions on how

to insert the attachment into the Universal Holder.

To open, press the latch on the attach-

ment and lift the cover.

Slide the tabs of the appropriate mask

into the corresponding slots on each side

of the attachment hinge. Fit the holes on

the other side of the mask (1) over the

registration pins (2) on the base of the

attachment. Always use a mask when

scanning or newton rings and flare may

degrade the image quality.

With the emulsion down, place the film on the mask.

Align the frame with the mask aperture.

Carefully close the cover until the latch clicks. See

page 15 for instructions on how to load the holder

into the scanner.

To open, press the latch on the attach-

ment and lift the cover.

Adjust the masking bars on the attach-

ment to the film format. White markings

indicate the format positions: 6X4.5, 6X6,

6X7, 6X8, and 6X9.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

No comments

Minolta MM-A208 Manual Page 12