Minolta MM-A208 Manual download pdf (Page 15)

Ejecting a film holder

Use the eject button on the scanner body or in

the DiMAGE Scan Utility window to remove the

holder; the scanner automatically ejects the

holder to its initial insertion position. Do not

touch or hinder the holder while it is moving.

When the indicator lamp goes out, remove the

holder from the scanner.

Do not insert the film holder into the scanner while

the DiMAGE Scan Utility is launching or the scan-

ner is initializing (the indicator lamp blinks during

this period).

Loading a film holder into the scanner

Before using the scanner, install the DiMAGE Scan Utility; see the software instruction manual.

Tu rn on the scanner and then start the computer. Launch the DiMAGE Scan Utility before insert-

ing the film holder.

Insert the film holder into the scanner in the direction

indicated by the white arrow. Hold the holder straight

and level when inserting it into the scanner.

Carefully push the holder into the

scanner until the arrow mark (1) is

aligned with the scanner door; the

holder will be automatically fed into

the scanner from that point. Never

touch or hinder the holder while it is

moving.

Eject

button

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

No comments

Minolta MM-A208 Manual Page 15