Minolta magicolor 2210 User's Guide download pdf (Page 55)

Automatic Jam Recovery

The magicolor

2210 provides automatic jam recovery (when enabled through

the Administration/Engine/Page Recovery menu). After you remove any

jammed media, printing automatically resumes from the page the printer

stopped at when the jam occurred.

For automatic jam recovery to work, it is necessary to leave the printer

turned on when you remove the jammed media.

You always adjust the media width

regulation guides in the multipur-

pose tray

after

inserting the media

(

a guide that is not properly

adjusted can cause poor print qual-

ity, paper jams, or printer damage)

Allowing the

output

tray to overfill

(

the face-down output tray has a

500-sheet capacity—jamming may

occur if you allow media to accumu-

late more than 500 sheets at a time

)

You remove transparencies from

the output tray immediately to avoid

static buildup.

You load the media (for single-sided

pages) printing-side up in the upper

or optional trays or printing-side

down in the multi-

purpose tray (m

any manufacturers

place an arrow on the end of the

wrapper to indicate the printing

side—if you can’t determine which

side of the media to print on,

remove the media from the tray,

rotate the stack a half-turn, turn the

stack over, and then place it back in

the tray)

Make sure that... Avoid...

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 175 176

Comments to this Manuals

No comments

Minolta magicolor 2210 User's Guide Page 55

Comments to this Manuals

Related products and manuals for Laser/LED printers Minolta magicolor 2210