Minolta magicolor 2210 User's Guide download pdf (Page 74)

Solving Other Problems72

Printing

takes too

much

time.

The printer is set to

a slow printing

mode (for example,

for OHP, thick

stock, or some

other special kind

of media).

It takes more time to print with special

media. When using regular paper, make

sure that the media type is set properly

in the driver.

The printer is set to

power saving

mode.

It takes a little time for printing to start in

power saving mode. If you do not want

to use this mode, disable it.

The printer mem-

ory is insufficient.

Add more memory.

A blank

startup

page

ejects or

blank

pages

come out

during a

printing

job.

One or more of the

toner cartridges is

defective, empty, or

missing.

Check the toner cartridges. The image

does not print if the cartridges are

empty.

If the toner cartridges are not empty

and blank pages are ejecting, take each

cartridge out, rock it from side to side,

and reinstall it in the printer.

The wrong media

is being used.

Check that the media type set in the

driver matches the media loaded in the

printer.

Not all

pages

print.

The printer could

have the wrong

kind of cable, or

your printer may

not be configured

for the correct

cable and port.

Check your cable.

The Cancel key

was pressed.

Make sure no one pressed the Cancel

key while your job was printing.

The media tray is

empty.

Check the message window to see if

the tray you are using is out of media.

Symptom Cause Solution

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 175 176

Comments to this Manuals

No comments