Engine and Controller Specifications
157
Engine
Engine Fuji-Xerox Hibana
Standard
average duty
cycle
3,000 simplex letter/A4 pages per month
The duty cycle is affected by the media type and percent
coverage.
Printer type Desktop, tandem, color laser marking engine
Print method Scanner: Semiconductor laser with rotating mirror
Recorder: Black writing electrophotographic
Process: Cyan, magenta, yellow, and black toner image
transfer to print media
Fuser: Heated rollers
Resolution 600 x 600 dpi (default)
1200 x 1200 dpi
You may also need additional memory (DIMMs) for the
following:
To print at maximum performance
To print complex graphics or complex PostScript
documents
For increased collation performance
For increased spooling performance
Toner Type: Chemical-type
Packaging: User-replaceable toner cartridges
Keyed toner cartridges are available from your local
vendor or from www.q-shop.com
.
Warm-up Typical: 1.5 minutes from power on, assuming normal
temperature and humidity.
After New Imaging Unit Installed: 6 minutes.
Input sources Standard: 100-sheet (face up) multipurpose tray
500-sheet (face down) upper tray
Optional: One 500- sheet (face down) tray in the 1x500
high-capacity input feeder
Two 500-sheet (face-down) trays in the 2x500
high-capacity input feeder
Output 250-sheet (face down) output tray on top of printer
Media sizes/
weights
See “Media Sizes and Print Area” on page 19.
Media type Cut-sheet
Notes The maximum media weight supported for duplex printing
is 28 lb bond (105 g/m
2
).
Comments to this Manuals