Minolta MAGICOLOR 3300 User's Guide Page 73
- Page / 198
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Replacing the Imaging Unit
65
9 Remove the black protective sheet
and dispose of it.
Attention
Do not touch black transfer rollers.
They are extremely sensitive to
hand oils and scratches, both of
which reduce print quality. This
type of damage is not covered by
the product warranty.
10 Close the covers , .
11 Turn on the printer.
You do not need to reset the con-
sumables usage monitoring sys-
tem when you replace an
imaging unit.
After approximately 6 minutes warmup (assuming normal temperature
and humidity), your printer prints a startup page and displays “IDLE” on
the message window.
This 6-minute warmup happens only when a new imaging unit has been
installed. Normal warmup time when the printer is turned on is approximately
1.5 minutes.
- User’s Guide 1
- Trademarks 2
- Thank You 2
- Contents 3
- Contentsii 4
- 2 Using Media 4
- 3 Color Printing 4
- 4 Replacing Consumables 5
- 5 Maintaining the Printer 5
- 6 Troubleshooting 5
- Contentsiv 6
- 7 Installing Accessories 6
- A Technical Specifications 7
- Contentsvi 8
- Software 9
- Software Utilities CD-ROM 10
- Software Utilities CD-ROM4 12
- Some Notes to Consider 13
- A USB cable 14
- A crossover Ethernet cable 14
- UNIX, NDPS, NetWare 19
- Using Media 21
- Media Storage and Handling 23
- Media Storage and Handling16 24
- Media Storage and Handling18 26
- General Notes about Media 26
- Media Sizes and Print Area 27
- Media Sizes and Print Area20 28
- Page Margins 28
- Image Alignment 29
- Output Tray 29
- Which print quality is best? 30
- Plain Paper 32
- Thick Stock 33
- Envelopes 34
- Glossy Media 35
- Label Stock 35
- Postcards (Japanese size) 36
- Loading Media 39
- Loading Media32 40
- Make sure that both the 41
- Loading Media34 42
- 2 Open the multipurpose tray 43
- Loading Media36 44
- 8 Fold the flaps 45
- 11 Print the envelopes 45
- Loading Media38 46
- 3 Load the media tray 48
- 4 Print the transparencies 48
- Duplexing 49
- Duplexing42 50
- Color Printing 53
- Color Registration 54
- Color Registration48 56
- PRISMLASER™ Technology 57
- Color Management and Control 57
- Further Information 58
- Replacing 59
- Consumables 59
- Starter Toner Cartridges 62
- Replacement Toner Cartridges 62
- Replacing a Toner Cartridge 65
- 2 Remove the top cover 66
- 10 Replace the top cover 68
- Replacing the Transfer 68
- 1 Turn off the printer 68
- Replacing the Transfer Unit 69
- Replacing the Imaging Unit 70
- 1 Turn off the printer 71
- Replacing the Imaging Unit64 72
- 10 Close the covers , 73
- 11 Turn on the printer 73
- Replacing the Fuser Unit 74
- 1 Turn the printer off 74
- Dispose of the used fuser 75
- 11 Close the covers , 76
- Maintaining the 79
- Handling the Printer 80
- Cleaning the Printer 81
- Cleaning the Printer74 82
- 7 Close the cover 86
- 8 Turn on the printer 86
- Troubleshooting 87
- Printing a Status Page 89
- Direct PDF File Printing 90
- Preventing Media Jams 92
- Automatic Jam Recovery 93
- Understanding the Media Path 94
- Clearing Media Jams 96
- 1 Remove the media tray 98
- Clearing Media Jams92 100
- WARNING! 101
- 2 Remove the jammed media 102
- 3 Close the front cover 102
- 3 Remove the jammed media by 103
- 5 Close the front cover 103
- 7 Close the front cover 104
- Solving Problems 105
- Solving Problems98 106
- Solving Problems100 108
- Solving Problems102 110
- Other Problems 110
- Solving Problems104 112
- Solving Problems106 114
- Solving Problems108 116
- Printing Quality 116
- Solving Problems110 118
- Solving Problems112 120
- Status and Error Messages 122
- Service Messages 131
- PostScript Errors 133
- Additional Assistance 134
- Installing 135
- Accessories 135
- Introduction 136
- Antistatic Protection 137
- BuzzBox (Americas Only) 138
- Using the BuzzBox 139
- Basic Functionality 141
- Maximum Performance 141
- Installation 141
- 4 Position the controller 142
- 6 Insert the new DIMM 143
- 7 Reinstall the controller 143
- 8 Reconnect all 143
- Duplex Kit (Americas Only) 144
- CrownView 145
- Fonts, Forms, and Signatures 146
- PlanetPress 147
- Optional Fonts 147
- CID Fonts 148
- Remove the upper media tray 151
- 15Reinstall the media trays 152
- Internal IDE Hard Disk 153
- 2 Loosen two screws (one on 153
- Internal IDE Hard Disk146 154
- Media Trays 155
- Time-of-Day Clock 155
- 1 Turn off the printer, and 156
- 2 Loosen the screws and 156
- 3 Attach the time-of 156
- Tray Cover 157
- Tray Cover150 158
- Technical 159
- Specifications 159
- Requirements 160
- ENERGY STAR Compliance 163
- Print Speed 164
- Engine 165
- Controller 166
- Electrical 167
- Current 168
- Environmental 168
- Physical 169
- Consumable Life Expectancies 170
- Transfer Unit 172
- Imaging Unit 172
- Document Option Commands 175
- Document Option Commands168 176
- Document Formatting 176
- PJL Command 177
- Menus170 178
- Security Menu 178
- Operator Control Menu 179
- Menus172 180
- Administration Menu 180
- Common Menu 181
- EtherTalk Menu 182
- LAN Manager Menu 183
- NetWare Menu 184
- TCP/IP Menu 185
- Regulatory Compliance 186
- Canadian Users Notice 187
- Regulatory Compliance180 188
- Laser Safety 188
- International Notices 188
- Warranty Considerations 189
- Warranty Considerations182 190
- Index184 192
- Index186 194
- Index188 196
Related products and manuals for Laser/LED printers Minolta MAGICOLOR 3300
(346 pages)© 2020, manymanuals.com. All rights reserved. | 4.091 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals