Minolta Di350 Service Manual download pdf (Page 47)

FrameMaker Ver.5.5E(PC) Di350 DIS/REASSEMBLY, ADJUSTMENT

98.12.09

D-34

Requirement

Adjust so that a correct loop is formed before the Synchronizing Rollers when paper is fed

through.

NOTE

This adjustment is to be made when any of the following symptoms occurs: variations in the

amount of print leading edge void, paper skew, and misfeed.

Adjustment Procedure

1. Call the Tech. Rep. mode to the screen.

2. Touch [Tech. Rep. Choice], then [Printer].

3. Touch [Loop Adjustment] to enter the Loop Adjustment mode.

4. Select the paper source for which the adjustment is to be made.

5. Press the Clear key to clear the current setting.

6. Enter the new setting value from the 10-Key Pad.

Setting Instructions

Change the setting value as necessary until there are no variations in the amount of void

image along the leading edge, skewed feeding, dog-ear, or misfeed.

7. Touch the [END] key to validate the setting value.

Caution

Be sure to touch the END key before returning to normal operation mode. If the Panel

Reset Key is used, the previous setting remains valid.

8. Perform the same steps to adjust for the other paper sources.

(3) Loop Adjustment

Adjust Mode Setting Value

Loop Adjustment -5 to +5

Setting Value

1171D030CA

1171D061CA

Use to change the + or - sign.

Use to clear setting value.

Use to enter setting value.

Use to change the + or - sign.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 170 171

No comments

Minolta Di350 Service Manual Page 47