Minolta PS7000 User Manual Page 114

  • Download
  • Add to my manuals
  • Print
  • Page
    / 122
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 113
6-2
Troubleshooting
Chapter 6
Troubleshooting warning messages
Warning message Possible cause Action
Bind Size is Too High
Press Down Book Table
The height of the surface of
the original is more than 65
mm above the book table.
Lower the original so that its
surface is within the range 65
mm above the book table.
Select Sheet mode.
The steel mirror is dirty. Clean the steel mirror.
Light from the room lighting
or the outside through
windows reflects on the steel
mirror.
Relocate the Scanner to a
place where light from the
room lighting or the outside
through windows does not
reflect on the steel mirror.
Change settings appropriately for the original, referring to
“Notes on originals”.
Bind Size is Not Detected
Reset Book or Change Sheet
A tag or bookmark is attached
to the original.
Take off tags and bookmarks.
Set the original upside down.
Indices are provided on the
top of the original.
Set the original upside down.
Set the distance between the
stopper and the original in
Book mode.
Select Sheet mode.
The steel mirror is dirty. Clean the steel mirror.
The hardcover has patterns.
Light reflects on the
hardcover.
When the mode is Book
mode, set the distance
between the stopper and the
original.
Change settings appropriately for the original, referring to
“Notes on originals”.
Book Exp. level is Too High
Set AE to off
The density of the original
surface is too high.
Cancel the setting for auto
exposure.
Turn off Frame Masking.
Select Sheet mode.
The original is not correctly
set.
No original is set.
Change settings appropriately
for the original, referring to
“Notes on originals”.
Set the original correctly.
Book Size is Not Detected
Reset Book or Change Sheet
A tag or bookmark is attached
to the original.
Take off tags and bookmarks.
Indices are provided on the
top of the original.
Select the Sheet mode and
cancel the Auto function.
Set the original upside down.
Page view 113

Comments to this Manuals

No comments