Minolta PS7000 User Manual download pdf (Page 117)

7-1

Maintenance

Chapter 7

Maintenance

The following daily checks and cleaning are required to ensure the best possible

performance and utmost safety from the Scanner.

Daily checks

1. Any of the following conditions could damage the Scanner or other electrical equip-

ment. Move the Scanner immediately and eliminate the possible cause of malfunction.

• The Scanner is placed on the power cord or other cables.

• The Scanner is placed on any cord of other electrical devices.

2. If any of the following conditions is found, turn the Scanner off immediately, unplug

the power cord from the outlet, and call your authorized dealer.

• The power cord or interface cable is damaged.

• The insulation of the power cord is damaged and the bare wires are exposed.

Cleaning

Scanner glass and illumination glass

The Scanner may not scan the original

correctly if the scanner glass or

illumination glass is dirty. Wipe the

surfaces with a dry soft cloth to remove

dirt.

Steel mirror and shading plate

The height of the original is not correctly

measured if the steel mirror or shading

plate is dirty, resulting in a warning

message. Wipe the surfaces with a dry soft

cloth to remove dirt.

NOTE

Be sure to turn the Scanner off and unplug the power cord before cleaning.

Scanner glass

Illumination glass

Steel mirror

Shading plate

1 2 ... 112 113 114 115 116 117 118 119 120 121 122

No comments

Minolta PS7000 User Manual Page 117