Minolta Scanner Mode User's Guide Page 123

  • Download
  • Add to my manuals
  • Print
  • Page
    / 346
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 122
Print Media
109
DO NOT use thick stock that is
Mixed with any other media in the trays (as this will cause media misfeed-
ing)
Envelope
Print on the front (address) side only. Some parts of the envelope consist of
three layers of paper—the front, back, and flap. Anything printed in these lay-
ered regions may be lost or faded.
You can print continuously with envelope. However, this could affect the
media feed, depending on the media quality and printing environment. If
problems occur, stop the continuous printing and print one sheet at a time.
Use envelopes that are
Common office envelopes approved for laser printing with diagonal joints,
sharp folds and edges, and ordinary gummed flaps
" Because the envelopes pass through heated rollers, the gummed
area on the flaps may seal. Using envelopes with emulsion-based
glue avoids this problem.
Approved for laser printing
Dry
Driver
Media Type
Thick Stock 1
Thick Stock 2
Weight 91 to 210 g/m² (25 to 55.9 lb bond)
Duplexing Not supported
Capacity Tray 1 Up to 10 sheets, depending on their thick-
ness
Tray 2/3 Not supported
Orientation Face down
Driver
Media Type
Envelope
Weight
91 to 163 g/m
2
(25 to 43 lb bond)
Duplexing Not supported
Page view 122
1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 345 346

Comments to this Manuals

No comments