Minolta Scanner Mode User's Guide download pdf (Page 300)

100

101

Solving Problems with Printing Quality286

If the problem is not resolved, even after all of the above have been per-

formed, contact Technical Support with the error information.

For contact information, refer to the Need Assistance sheet.

Colors are

not register-

ing properly;

colors are

mixed or

have

page-to-pag

e variation.

Gradations are not

adjusted correctly.

Set

MACHINE SETTING/CALI-

BRATION

in the UTILITY menu to

ON, and then perform the AIDC color

calibration. For details, refer to

“MACHINE SETTING Menu” on page

33.

The front cover is

opened during the

calibration.

One or more of the

toner cartridges may

be defective.

Remove the toner cartridges and

check for damage. If it is damaged,

replace it.

The media is moist

from humidity.

Remove the moist media and replace it

with new, dry media.

Line art does

not print in

color.

The line art setting for

2400 x 600 dpi

requires Color Match-

ing to be turned off.

In the printer driver, go to Quality tab

and choose Off in the Color Matching.

Lower the resolution to 1200 x 600 or

600 x 600 dpi.

The color

has a poor

reproduction

or has poor

color density.

One or more of the

imaging units may be

defective.

Remove the imaging units and check

for damage. If it is damaged, replace it.

Symptom Cause Solution

1 2 ... 295 296 297 298 299 300 301 302 303 304 305 ... 345 346

Comments to this Manuals

No comments

Minolta Scanner Mode User's Guide Page 300

Comments to this Manuals

Related products and manuals for Laser/LED printers Minolta Scanner Mode