Minolta DIMAGE VIEWER 2.1 Instruction Manual download pdf (Page 166)

166

ROUBLESHOOTING

If the camera does not function normally, turn it off, remove and reinsert the battery, or

unplug and reconnect the AC adapter. Always turn the camera off using the main switch

otherwise the memory card may be damaged and camera settings reset.

The camera temperature rises with extended periods of use. Care should be taken to

avoid burns when handling the camera, batteries, or memory card.

Shutter speed and

aperture combination is

extremely under or over-

exposing the live image.

Change the shutter speed or

aperture value until an image

appears on the monitor (p. 56).

Shooting data

is displayed,

but live image

is entirely

black or

white.

Camera set to

manual-

exposure

mode (M).

Problem Symptom Cause Solution

Live image

turns black

and white.

Camera used

under low-light

conditions.

With still images, automatic monitor amplification activates

under low-light conditions (p. 34). Although the live image is

black and white, the recorded still image will be color. In

movie recording, the Night Movie mode will record black

and white images.

WHEN USING FILTERS

Polarizing filters and close-up lenses may cause vignetting at the wide-angle range of the

lens (below the 50mm mark on the zooming ring). With very powerful close-up lenses,

such as a +3 or Minolta No. 2, vignetting may be noticeable below 100mm. Most step-up

rings will cause vignetting. The Minolta Step-up Adapter 49mm to 62mm can be used.

Subject or scene is out-

side the metering range

of the camera.

Change the camera sensitivity

(p. 74) or the light levels.

Inaccurate

exposures

with very

bright or dark

scenes.

Metering-mode

indicator is

red.

1 2 ... 161 162 163 164 165 166 167 168 169 170 171 ... 179 180

Comments to this Manuals

No comments

Minolta DIMAGE VIEWER 2.1 Instruction Manual Page 166

Comments to this Manuals

Related products and manuals for Film cameras Minolta DIMAGE VIEWER 2.1